note: all specifications are subjec t to change without notification. scd's for these devices should be re viewed by ssdi prior to release. data sheet #: rc0148b doc solid state devices, inc. 14701 firestone blvd * la mirada, ca 90638 phone: (562) 404-4474 * fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com designer?s data sheet part number/ordering information 1 / sdr75 __ u __ __ _ _ screening 2 / __ = not screened tx = tx level txv = txv level s = s level lead bend options (to-254, z) db = down bend ub = up bend package s1= smd1 m = to-254 z = to-254z recovery time u = ultra fast family/voltage 010 = 100v 015 = 150v 020 = 200v sdr75010u thru sdr75020u 75 amp ultrafast rectifier 100 - 200 volts 50 nsec features: ? ultra fast recovery: 45 ns typical ? high surge rating ? low reverse leakage current ? low junction capacitance ? hermetically sealed package, isolated (to-254, z) or hot case (smd1) ? gold eutectic die attach available ? ultrasonic aluminum wire bonds ? tx, txv, or space level screening available maximum ratings symbol value units peak repetitive reverse and dc blocking voltage 3 / sdr75010 sdr75015 sdr75020 v rrm v rwm v r 100 150 200 volts average rectified forward current 4 / (resistive load, 60 hz sine wave, t c = 100oc) i o 75 amps peak surge current (8.3 ms pulse, half sine wave, t a = 25oc, per leg) i fsm 350 amps operating & storage temperature t op & t stg -65 to +200 oc maximum total thermal resistance junction to case, smd1 junction to case, to-254, z r jc 1.0 1.2 oc/w notes: 1 / for ordering information, price, and availability, contact factory. 2 / screening based on mil-prf-19500. screening flows available on request. 3 / higher voltages available. smd1 to-254 to-254z http://www..net/ datasheet pdf - http://www..net/
note: all specifications are subjec t to change without notification. scd's for these devices should be re viewed by ssdi prior to release. data sheet #: rc0148b doc electrical characteristic symbol typ max units instantaneous forward voltage drop (t a = 25oc, 300 ? 500 sec pulse) i f = 20 a i f = 50 a i f = 80 a v f1 v f2 v f3 0.80 0.84 0.88 0.95 0.98 1.10 v dc instantaneous forward voltage drop (t a = -55oc, 300 ? 500 sec pulse) i f = 20 a i f = 50 a i f = 80 a v f4 v f5 v f6 0.90 0.95 0.98 1.1 1.15 1.2 v dc instantaneous forward voltage drop (t a = 125oc, 300 ? 500 sec pulse) i f = 20 a i f = 50 a i f = 80 a v f7 v f8 v f9 0.64 0.70 0.74 0.80 0.86 0.90 v dc reverse leakage current (100% of rated v r , 300 s pulse min.) t a = 25oc t a = 100oc t a = 125oc t a = 150oc i r1 i r2 i r3 i r4 0.3 5 20 75 25 - 250 - a reverse recovery time ( i f = 0.5 a, i r = 1 a, i rr = 0.25 a, t a = 25oc) t rr1 45 50 nsec reverse recovery time ( i f = 10 a, di f /dt = 100 a/us) t a = 25oc t rr2 i rm2 45 3.5 - - nsec a junction capacitance (t a = 25oc, f = 1 mhz) v r = 5 v dc v r = 10 v dc c j 970 760 - 900 pf solid state devices, inc. 14701 firestone blvd * la mirada, ca 90638 phone: (562) 404-4474 * fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com sdr75010u thru sdr75020u http://www..net/ datasheet pdf - http://www..net/
note: all specifications are subjec t to change without notification. scd's for these devices should be re viewed by ssdi prior to release. data sheet #: rc0148b doc case outline: smd1 case outline: to-254 case outline: to-254z optional lead bent configuration pin assignment down bent (db suffix) up bent (ub suffix) for information on curves, contact the factory representative for engineering assistance. package pin 1 pin 2 pin 3 smd1 anode cathode anode to-254 cathode anode anode to-254z cathode anode anode solid state devices, inc. 14701 firestone blvd * la mirada, ca 90638 phone: (562) 404-4474 * fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com sdr75010u thru sdr75020u http://www..net/ datasheet pdf - http://www..net/
|
